T-22 Wedges
T-22 WEDGE FEATURES
FORGED IN HIROSHIMA JAPAN
One-piece Grain Flow Forged HD Boron at Mizuno’s iconic facility in Hiroshima, Japan – where Mizuno irons have been produced since 1968.
SOFT COPPER UNDERLAY
A microlayer of copper beneath Nickel Chrome – for an extra millisecond of control at impact.
MODIFIED TEARDROP
A slightly more compact profile with an extensively beveled top edge – creating the appearance of a thinner edge.
SPIN WEIGHTED BLADE DESIGN
By flaring or tapering the upper portion of the blade, the T22 creates a higher consistent spin and a more penetrating trajectory.
WET WEATHER PERFORMANCE
Mizuno’s HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off.
PRECISE GROOVES THAT LAST LONGER
Quad Cut Milled and loft specific – cut into Boron infused steel for a longer effective lifespan.
SATIN CHROME, DENIM COPPER OR RAW
Raw steel comes without soft copper underlay – but will rust over time for a look requested by many of our tour players.
3 FINISHES
4 GRINDS
T-22 WEDGE SPECS
T-22 S GRIND WEDGE SPECIFICATION
Minimal sole grind for fuller shots and lower lofts.
| Club # | Loft ° | Lie Angle | Length (inch) | Bounce |
| 45/05 | 45 | 63 | 35.5 | 5 |
| 46/06 | 46 | 63 | 35.5 | 6 |
| 47/07 | 47 | 63 | 35.5 | 7 |
| 48/08 | 48 | 63 | 35.5 | 8 |
| 49/06 | 49 | 63 | 35.5 | 6 |
| 50/07 | 50 | 63 | 35.25 | 7 |
| 51/08 | 51 | 63 | 35.25 | 8 |
| 52/09 | 52 | 63 | 35.25 | 9 |
| 53/10 | 53 | 63 | 35.25 | 10 |
| 54/12 | 54 | 63 | 35.25 | 12 |
| 55/13 | 55 | 63 | 35.25 | 13 |
| 56/14 | 56 | 63 | 35.25 | 14 |
| 57/15 | 57 | 63 | 35.25 | 15 |
| 58/16 | 58 | 63 | 35.25 | 16 |
T-22 D GRIND WEDGE SPECIFICATION
Moderate heel and toe relief. Allows gentle manipulation of the clubface.
| Club # | Loft ° | Lie Angle | Length (inch) | Bounce |
| 54/08 | 54 | 63 | 35.25 | 8 |
| 55/09 | 55 | 63 | 35.25 | 9 |
| 56/10 | 56 | 63 | 35.25 | 10 |
| 57/11 | 57 | 63 | 35.25 | 11 |
| 58/12 | 58 | 63 | 35.25 | 12 |
T-22 C GRIND WEDGE SPECIFICATION
Heavy heel and toe relief. For skilled players and firmer conditions.
| Club # | Loft ° | Lie Angle | Length (inch) | Bounce |
| 56/06 | 56 | 63 | 35.25 | 6 |
| 57/07 | 57 | 63 | 35.25 | 7 |
| 58/08 | 58 | 63 | 35.25 | 8 |
| 59/09 | 59 | 63 | 35.25 | 9 |
| 60/10 | 60 | 63 | 35.25 | 10 |
T-22 X GRIND WEDGE SPECIFICATION
Extreme relief from the heel, toe, and trailing edge. For short game artists.
| Club # | Loft ° | Lie Angle | Length (inch) | Bounce |
| 58/04 | 58 | 63 | 35.25 | 4 |
| 59/05 | 59 | 63 | 35.25 | 5 |
| 60/06 | 60 | 63 | 35.25 | 6 |
| 61/07 | 61 | 63 | 35.25 | 7 |
| 62/08 | 62 | 63 | 35.25 | 8 |
Dexterity: RH Satin Chrome, Demin Copper & Raw. LH Satin Chrome only.
ST-G 220 Driver
ST-G 220 DRIVER FEATURES
MODERN PLAYER’S PROFILE
Deeper faced, shorter back to front, but using the full capacity 460cc head size.
NEW MULTI-THICKNESS CORTECH FACE
Refined to maximize the return from Mizuno’s Beta Ti face. Ball speeds most noticeably improved low on the clubface.
NEW DUAL WEIGHT CENTRE SLOT
Allows 2 central back weights for deeper CG capability – higher stability, launch, and spin.
GREATER DRAW / FADE BIAS
Increased separation between lateral weight tracks.
CONSISTENTLY SOLID FEEDBACK
A tighter range of feel and sound across the weight settings.
QUICK SWITCH ADJUSTABILITY
4 degrees of loft adjustability to fine-tune look and trajectory.
OPTIMIZED WAVE SOLE
Delivers an additional contribution to ball speed – low from the clubface.
EXPANDED ADJUSTABILITY
In every setting, the ST-G delivers impressive performance from off-center strikes – with impressively consistent feedback across its varying weight positions.
QUICK SWITCH ADJUSTABILITY
4 degrees of loft adjustability to fine-tune look and trajectory.
ST-G 220 DRIVER SPECIFICATION
Mizuno’s new Forged SAT2041 Beta Ti face and complex carbon construction deliver both potent ball speeds and a dense, satisfying sensation at impact.
| Model | Loft Range° | Lie Range | CC | Length (inch) |
| ST-G 9.0 | 7-11 | 56.5-59.5 | 460 | 45 |
Dexterity: ST-X 10.5 RH Only, ST-G 9.0 RH Only
